Routine Servicing Of The Glove Box

Aus AStA Wiki
Zur Navigation springen Zur Suche springen

Etelux reminds you that in addition to the frequent inspection of the glove box, the each day routine maintenance get the job done of the glovebox is also required

1. In advance of and just after every function, initially cleanse the ecosystem to make the floor dry and clean up. Then cleanse the gear, including the interior and outer surfaces of the glove box, the observation process, the function surface, and many others., to be cost-free of particles and clean up.

two. Diligently report the h2o, oxygen material, and gas consumption of the devices in the glove box every single working day to avoid inadequate gasoline pressure and trigger the products to prevent working.

3. Fork out consideration to the volume of gas in the functioning gasoline cylinder at any time and replace it in time.

4. In case of ability failure, push the "vacuum pump" button on the panel to make the vacuum pump operate just after ability on


5. Take note: Just after electrical power on, if there is a challenge that it are not able to begin, the likelihood is that the vacuum pump electrical power cable is loosely related. The next reason is that the vacuum pump’s possess change is not turned on


6. When you want to place the sample into the glove box, use a smaller changeover chamber as substantially as achievable. Before opening the transition doorway, spend notice to whether or not the pressure gauge pointer on the valve cavity is at the zero posture. If it is, you can open it immediately if not, you need to have to convert the swap beneath the valve cavity to the "filling" situation to permit the gasoline enter the glove box changeover compartment, and then turn the swap back again to the intermediate placement, then you can open up the changeover compartment Place the sample in the door, and then close the door. When positioning samples, be watchful not to contact the inner wall of the changeover chamber with your arms, have on gloves to select and put the sample



Executing these regime maintenance tasks can decrease the loss amount of the glove box, increase the service existence of the glove box, and also minimize the prevalence of accidents